Garment or Body Measurements
Most charts show a garment laid flat. Use charts marked as a body reference only to choose a starting size.
SIZE GUIDE & MEASUREMENT LIBRARY
Jersey Size Charts by Sport and Product
Choose the exact sport, garment and wearer group before comparing measurements. Use centimeters or fractional inches where conversion is available, then confirm the final fit with the approved sample and specification.
25Sport and product categories
140Size charts in two libraries
cm / 1/8 inConversion where available
BASEBALL · YOUTH & ADULT
Baseball Jersey Size Chart
Use this chart for a standard short-sleeve baseball jersey. It shows finished-garment measurements, not body measurements.
Choose a sport
Unit
Swipe to compare all sizes
| Measurement | Youth | Adult | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| YS | YM | YL | YXL | XS | S | M | L | XL | 2XL | |
| A Center-back length | 62 | 64.5 | 67 | 69.5 | 70.75 | 72 | 74.5 | 77 | 79.5 | 82 |
| B 1/2 chest width | 43 | 45.5 | 48 | 50.5 | 51.75 | 53 | 55.5 | 60 | 62.5 | 65 |
| C Sleeve length | 16 | 17 | 18 | 19 | 19.5 | 20 | 21 | 22.5 | 23.5 | 24.5 |
| D Cuff width | 14.5 | 15.5 | 16.5 | 17.5 | 18 | 18.5 | 19.5 | 20.5 | 21.5 | 22.5 |
Reference only: Pattern, fabric and fit can change measurements. Production follows the approved size specification and sample.
MORE PRODUCT SIZE CHARTS
Additional Teamwear and Apparel Size Charts
Use this separate library for shorts, pants, jackets, compression wear and other product styles. Measurement labels and source notes stay with each chart, and unit conversion appears only when the source clearly identifies one measurement system.
23Product categories
118Additional charts
cm / 1/8 inConversion where available
BASEBALL · ADDITIONAL PRODUCT
Baby Baseball Uniform
Choose a category
Unit
Source: Inches (in)
Units in this chart
As listed in the source
Swipe to compare all sizes
| Measurement |
|---|
Source note: Values are shown as recorded in the source chart.
HOW TO READ THE CHARTS
Check the Measurement Type First
Charts may use different measurement points for each sport, garment style and wearer group. Read the row labels before comparing sizes.
Half Width or Circumference
A 1/2 chest is the flat width across the garment. It is not a full body circumference.
Use the Same Points
Measure the neck, shoulder, sleeve, cuff and hem from the same starting points on the reference garment, sample and finished jersey.
Account for Sport Fit
Use the approved sport-specific chart for pads, movement, riding posture or a close athletic fit.
BEFORE PRODUCTION
Lock the Size Standard Before Production
A size label is useful only when it matches the correct garment, pattern, measuring method and approved sample.
- 01
Choose the correct chart
Match the sport, garment style, wearer group, equipment and intended fit.
- 02
Test the fit sample
Compare it with the chart and check movement, layering and equipment where needed.
- 03
Approve one size record
Keep the final chart, pattern, sample, roster and special measurements together for production.
Send Your Size Chart Before Sampling
Send the sport, garment style, source chart or reference sample, measurement photos, roster, special-size notes, quantity, destination and required date. Mark whether each value is a garment or body measurement.
From 10 pcs
MOQ per design
5–7 days
Sample time
15–20 days
Production time
Timing starts after the required details, approvals and payment are confirmed. Shipping is separate.
Jersey Size Chart Questions
How to read measurements, use converted units and approve sport-specific or special sizes.
Most charts show finished garments measured flat. Charts marked as a body reference are different. Never compare a flat 1/2-chest width with a full body circumference.
No. Sport-specific garments use different proportions and fit allowances. Choose the chart for the exact sport and garment style.
Compare a well-fitting jersey or fit sample with the chart. If standard sizes do not work, record the needed length, width or sleeve change.
Yes. Send the chart, measurement-point definitions and a reference sample or technical drawing. Confirm the fit sample before bulk production.
Test equipment-fit samples with the intended pads or goalkeeper equipment. Record approved length, width and sleeve changes against the final pattern and roster.
Converted inch values are rounded to the nearest 1/8 inch. Use the original chart and approved specification when an exact production measurement is needed.
A unit switch appears only when the source clearly uses one measurement system. Charts with both units or no confirmed unit stay as recorded to avoid an unreliable conversion.